Showingof 2509 item(s)
The Tucker's Cone Art Kiln model 2809G is an excellent choice for doing large amount of glass fusing and slumping. It is a full 28″ across and 9″deep.
C$4,115.00
The Tucker's Cone Art Kiln model 2813G is an excellent choice for doing large amount of glass fusing and slumping. It is a full 28″ across and 13″deep.
C$4,465.00
The Tuckers Cone Art Kiln Model 2818D is a perfect choice for firing wide objects such as platters yet the low profile makes it easy to load and unload.
Make your controller selection below:
Make your controller selection below:
C$6,630.00
The Cone Art 2822D will easily fire to cone 10. With a 28” interior diameter this kiln is suited for 26” diameter shelves, and just like the 2822D is a little easier to reach the bottom than with standard depth kilns.
Make your controller selection below
Make your controller selection below
C$7,370.00
The Tuckers 2827D Cone Art Kiln is a true production kiln that has been designed to fire easily to cone 10 even with high mass loads like tiles.
Make your controller selection below:
Make your controller selection below:
C$8,185.00
The Tucker's Cone Art Glass Kiln model 4209G is our second largest glass fusing and slumping kiln measuring a full 42″ wide, 31″ from back to front and 9″ deep.
C$5,375.00
The Tuckers Cone Art Kiln model 4213G is our largest glass fusing and slumping kiln. The giant 4213G is a full 42″ wide, 31″ from back to front and 13 ” deep.
C$6,035.00
The Tuckers Cone Art Kiln Model 4222D is a massive 13.7 cubic feet oval kiln with a full 42″ width, 31″ from front to back and a 22.5″ depth. The 4222D is designed for a busy production or sculpture studio.
Make your controller selection below:
Make your controller selection below:
C$11,295.00
The Tuckers Cone Art Kiln Model 4227D is a massive 16.5 cubic feet oval kiln with a full 42″ width, 31″ from front to back and a 27″ depth. The 4227D is designed for a busy production or sculpture studio.
Make your controller selection below:
Make your controller selection below:
C$11,890.00
The Cone Art Kilns maintenance kits are designed to be the kiln equivalent of a home First Aid Kit - they contain just enough of the most important parts of your kiln to ensure no break down has to mean lost firings. Select from the models listed below:
C$296.00
A wiring harness is a complete kit of every wire and connector in your kiln, pre-cut to size, colour coded, labelled, and with connectors crimped on at the factory.
C$105.00
A wiring harness is a complete kit of every wire and connector in your kiln, pre-cut to size, colour coded, labelled, and with connectors crimped on at the factory.
C$190.00
A wiring harness is a complete kit of every wire and connector in your kiln, pre-cut to size, colour coded, labelled, and with connectors crimped on at the factory.
C$220.00
A wiring harness is a complete kit of every wire and connector in your kiln, pre-cut to size, colour coded, labelled, and with connectors crimped on at the factory.
C$285.00
The Shredder is an indispensable tool for shaping and carving leather hard clay.
C$18.75
These mitts are rated to 320°C or 608°F and are fully lined with 11oz of knit cotton for extra comfort and insulation. Extra-strong, pre-serged inside seams and reinforced Twaron® thumb patches increase their lifespan.
C$32.50
Copper Carbonate is a green powder used as a glaze or slip colourant. Depending on conditions and formulation it may produce green, blue-green or copper red (reds occurring most commonly in reduction firings).
C$29.70
Copper Oxide Black is a greyish-black powder used to colour slips and glazes. It acts as a flux and produces fluid glazes. May also be used as a wash via brush application to bisqueware.
C$41.85
Cornwall Stone is a low iron feldspar material used primarily as a flux in clay bodies and glazes. It is popular in engobes for its adhesive power during and after firing and in glazes for its low shrinkage and minimal contribution to defects.
C$19.70
Coyote 074 Alabaster Satin is a smooth, not quite glossy white, Alabaster Satin is ideal as a liner glaze for functional ware. Try using it with underglaze like a majolica base. Please see below for further information and stock availability.
C$20.95
Coyote 001 Almost Teal is a deep blue with a smooth, glossy surface. As easy to use as it is beautiful, Almost Teal is one of the most popular starting points for glaze combinations. Please see below for further information and stock availability.
C$24.15
Coyote 216 Amethyst is a stunning multihued purple glaze with warm and cool tones blending into eachother like the last minutes of dusk. Please see below for further information and stock availability.
C$42.65