Showingof 24 item(s)
Ideal for adding decorative elements to ceramic work, the Nidec Shimpo Handheld Clay Extruder has a 2-1/4"Dia barrel, and includes five stainless steel multi-shaped dies and one blank.
C$95.00
The Bailey Standard 4 Extruder is designed to extrude small to medium sized clay forms. Extrusion Range: Small single solid clay coils and handles, hollow clay tubes up to 2" square or 3" round. Available in Standard and Stainless - select below.
C$770.00
5 x 6 aluminum die plate with various sized cut-outs. Includes Standard Die Brace and an insert to create a hollow tube. Walls of the tube are approx. 1/4" thick.
C$18.50
The Shimpo Hollow Die Extruder Set comes with eight dies as shown and the barrel insert to hold the dies in place. Just place the barrel and the hollow die in the Shimpo hand-held extruder and extrude hollow forms!
C$68.50
This eight piece die kit features a variety of basic shapes ideal for coil building and other handbuilt applications. The 2″ aluminum dies will fit both our Super Duper Clay Gun and our XL Clay Gun. These dies will also fit the Shimpo Hand Held Extruder.
C$33.90
The Bailey Clay Extruder System Cutting/Removal Wall Bracket is an extremely valuable component for completing large scale clay extrusions
C$565.00
The Standard Die Kit is an excellent selection of small and medium sized clay extruder dies that can be used with all Bailey 4" and 5" clay Extruders and Barrels.
C$270.00
The Bailey Clay Extruder Standard Table Mount is an excellent solution for any situation where there is no suitable wall to attach the clay extruder. It is only designed to use with the Standard clay extruders. Use only with a secure, sturdy table.
C$195.00
The Bailey Standard 5 Clay Extruder is designed to extrude medium sized clay forms. Extrusion Range: Multiple solid clay coils.
C$930.00
If you are extruding a large 8" square or round form, use this X shaped brace to support the outer corners of the inner die plate. This will prevent the corners of the inner die from flexing down under load and extend the life of your die.
C$0.00
Part of the Bailey System Extruder line to be used with either the System 1 Manual Drive Frame or the System 3 Power Drive Frame. *Drive Frames must be purchased separately.
C$575.00
Part of the Bailey System Extruder line to be used with either the System 1 Manual Drive Frame or the System 3 Power Drive Frame. *Drive Frames must be purchased separately.
C$710.00
Part of the Baily System Extruder line, this is an expansion box made of 'mild steel' that attaches to the bottom of the Bailey Clay Extruder System Tile Barrel to evenly extrude tiles from 6" - 14" Wide as well as narrow hollow forms.
C$390.00
Stainless steel braces to be used with Bailey's die sets. See below for further information.
C$13.00
The EBX Clay Extruder Die Kit is a selection of large forms (4" - 8") for use with the Bailey 9" Clay Extruder and Barrels.
C$320.00
The Bailey Standard 9 Clay Extruder is designed to extrude medium to large sized clay forms up to 8" across.
C$1,390.00
These dies were designed to extrude trim pieces for your tile projects. Add these special extrusions to your field tile and add that unique design element.
C$64.75
This acrylic die kit will allow you to extrude handles for mugs, casseroles, and pitchers with ease using the either the Super Duper or XL Clay guns. These dies will also fit the Shimpo Hand Held Extruder.
C$64.75
Allows the use of 5 x 6 aluminum dies with the Bailey 9" clay extruder barrels.
C$39.00
Part of the Bailey System Extruder line to be used with either the System 1 Manual Drive Frame or the System 3 Power Drive Frame. *Drive Frames must be purchased separately.
C$690.00
The Bailey System 1 Manual Drive Frame is designed for use with any Bailey Extruder System Barrel. Barrels bolt to the Drive Frame and can be interchanged depending on the size of the extrusion desired. *Barrels sold separately.
C$530.00
11 x 13 Baltic Birch die plate with a 4", 6" or 8" Round cut-out. Includes System Braces and a round insert to create a hollow tube. Walls of the tube are approx. 1/2" thick. This form can only be used with the 9" Extruders/Barrels.
C$27.50
The Shimpo 4 IN 1 Extruder die set for their Handheld Extruder comes with 9 dies and 1 block out die.
C$75.00
Use these popular shape dies to form decorative additions to your pottery. The large and small coil die dies make extruding evenly thick coils effortless.
C$64.75
Showingof 24 item(s)