Showingof 208 item(s)
Frit 3195 contains sodium, calcium and boron. It is used in satin, earthenware glazes.
C$11.70
Frit 3134 consists of sodium, calcium and boron and is typically used in both transparent and opaque glazes. (also see Fusion Frit F-12 as a replacement - linked below.
C$11.40
Magic Mender Low Fire is a miracle product that allows you adhere parts together and repair cracks. Can be used on greenware or bisque but must be re-fired for repair to be permanent.
C$14.25
Burnt Umber is the calcined (heated) version of raw umber, which is a natural brown to reddish-brown earth pigment. In ceramics, Burnt Umber is most commonly used as a body stain in light/white-colored clays.
C$13.90
Hydro-Stone® Gypsum Cement is especially suitable where high strength and resistance to water absorption are necessary. It is ideal for applications in both the tooling & prototyping and art & statuary categories.
C$75.00
Petalite, a lithium feldspar with a high silica content, is used both in glazes and clay bodies to help decrease thermal shock.
C$15.75
Spectrum's 2000 Series Ceramic Stains can be used to colour glazes, underglazes, engobes, slips and clay bodies. Available in a beautiful pallet, these stains are great to work with and, for the most part, intermixable to create new shades.
C$10.00
Spectrum's 2000 Series Ceramic Stains can be used to colour glazes, underglazes, engobes, slips and clay bodies. Available in a beautiful pallet, these stains are great to work with and, for the most part, intermixable to create new shades.
C$11.50
Spectrum's 2000 Series Ceramic Stains can be used to colour glazes, underglazes, engobes, slips and clay bodies. Available in a beautiful pallet, these stains are great to work with and, for the most part, intermixable to create new shades.
C$17.75
Spectrum's 2000 Series Ceramic Stains can be used to colour glazes, underglazes, engobes, slips and clay bodies. Available in a beautiful pallet, these stains are great to work with and, for the most part, intermixable to create new shades.
C$6.25
Cobalt Oxide is a reliable, stable, black powdered oxide. In small amounts it produces consistently intense blue tones. Used as a glaze colorant and brushing oxide decoration.
C$89.00
Cobalt Carbonate is a fine particled lavender powder used as a colorant in glazes and slips. Very stable and reliable. Produces various shades of blue when used alone and will produce the same shades of blue when used in almost every type of glaze.
C$74.10
Bentonite is a fine powder that is a grey-tan color. As typical for ceramic use, this is a sodium bentonite and is a common additive to both glaze and clay. Use in small percentages to aid clay body plasticity and glaze suspension.
C$9.85
Alberta Slip duplicates the firing properties of Albany Slip and is an excellent base for many types of glazes.
C$11.70
Feldspar Potash (Custer) is one of the primary feldspars used in ceramics. Mahavir has been found to be a good substitute for Custer, however, as with any raw material change in a recipe, please test first.
C$8.40
Veegum, or VeeGum T (or VGT) is not a 'gum', rather it is a refined fine particle mineral called 'smectite'. In glazes VGT is used as an in-mix suspending agent and surface hardener. Also suitable for use as a spray-on surface hardener before decorating.
C$65.00
On paper, Fusion F-12 has a very similar chemistry to 3134.
C$11.00
Zinc Oxide (Calcined) is a useful, high temperature flux. It increases the maturing range of glazes and produces glossy colors (brightens copper and cobalt colours but may dull others). Higher amounts are used in zinc matte and zinc crystalline glazes.
C$13.20
Spodumene (substitute) is a silicate mineral often referred to as lithium feldspar. Commonly used in ceramics as a source of lithia which is used as a powerful flux especially when used with potash and soda feldspars.
C$94.15
Ravenscrag Slip is a silty low iron clay, it applies evenly, drains drip-free, dries hard, does not settle. Mixed with water alone, makes a nice semi-matte cone 10 clear glaze.
C$6.80
For more than 40 years, Mason Color has been a global supplier of high-performance pigments to all sectors of the ceramic industry. These include pigments for use in the manufacture and production of pottery, artware, and bricks. Sold in 100g increments.
C$9.60
For more than 40 years, Mason Color has been a global supplier of high-performance pigments to all sectors of the ceramic industry. These include pigments for use in the manufacture and production of pottery, artware, and bricks. Sold in 100g increments.
C$4.70
For more than 40 years, Mason Color has been a global supplier of high-performance pigments to all sectors of the ceramic industry. These include pigments for use in the manufacture and production of pottery, artware, and bricks. Sold in 100g increments.
C$15.30
For more than 40 years, Mason Color has been a global supplier of high-performance pigments to all sectors of the ceramic industry. These include pigments for use in the manufacture and production of pottery, artware, and bricks. Sold in 100g increments.
C$6.25