PC-42 Seaweed - Pint
| Availability: | Out of stock |
Seaweed is a fluid, deep green glaze that layers beautifully with a variety of Potter's Choice glazes. This glaze breaks brownish over texture and becomes more fluid with thickness. Glaze may run. Pay attention to application thickness so the glaze does not flow onto kiln shelves during firing.
The Potter's Choice glaze series was designed with the potter in mind! These stunning glazes add fluid colors and effects to smooth or textured ware, with optimal results at Cone 5/6. To use these glazes is to step into different ceramic glaze traditions of many cultures throughout history.
•Reduction Effects in Oxidation
•Variety of Colors and Surfaces
•Cone 5 / 6
•Limitless Layering Combinations!
Click here for the downloadable PDF of the Potter's Choice glaze page from Amaco's field guide.
Click here for PC Glaze Application Tips.
Due to the powdered nature of the materials involved with the dry-mix dipping buckets of this product, their respective health information and labels differ from the brushing glazes.
*Note that all dry dipping glazes can be difficult to layer. Dipping glazes behave differently from brushing and they require thorough testing prior to layering full piece.
Safety Warning
Tableware producers must test all finished ware to establish dinnerware status, due to possible variations in firing temperature and contamination.
Cool effects on its own, but extremely cool effects when layered on top of a dark glaze. I add 2-3 brushed coats on the top half of the vessel, on top of 2 coats of obsidian or a dark blue, and you get dreamy blues and greens.
Warning, this glaze has flux and does run a bit when fired (a few millimeters ). I love this glaze but its has stuck to a few kiln shelves, so just make sure to leave a half a centimeter at the bottom of your pot and you should be fine!
