Showingof 2523 item(s)
Make perfect tiles every time from a rolled out slab. Made from high quality stainless steel.
C$66.00
Our kiln shelves are made from a refractory mix that is high in alumina and are rated for use up to cone 11 in oxidation or reduction atmospheres.
C$54.75
Each setter is 6-3/4" long with 7 slots. Each slot measures 1-3/8" wide, 5/8" front to back at the top and tapers toward the bottom and each slot is 5/8" high.
Sold in pairs.
Sold in pairs.
C$34.65
Designed to stilt and stack plates, these plate setters work well for any shape or size of plate and are much more space and energy efficient than stacking multiple shelves. Recommended for use with cone 04 or lower, and 8" plates or smaller.
C$19.50
These tile holders are the ideal way to stack any size of tile in your kiln.
C$19.65
The Shape 0 is the smallest rib shape from Mudtools and one of their best sellers. This little rib can get into tight places and is good for detail work.
C$17.40
The Mudtools Shape 1 Stainless Rib is the traditional kidney-shaped rib. It fits well in the hand and is useful for sculpting, hand building and throwing clay. Shape 1 is not too big. Not too small. It is just right.
C$17.40
Mudtools Shape 2 Stainless Rib is a workhorse for throwing, smoothing and compressing. In the Mudtools family, this shape is one of the firstborn.
C$19.65
The corner point on the Mudtools Shape 4 Stainless Rib gives a beautiful line on the clay. You also get two flat surfaces and three radiuses.
C$19.65
Mudtools Shape 5 Stainless Rib is the same traditional kidney-shape as Shapes 0 & 1, only bigger. It offers more surface coverage, making them great for smoothing a slab of clay.
C$19.50
Here is a rib that stands firm. Made of a heavier grade stainless steel, Mudtools Shape 7 Stainless Rib has less flexibility than some of the other ribs. The blunt end is good for carving away material or removing waste clay on the wheel.
C$29.95
The Mudtools Small Bowl Rib is designed to give as many radius sweeps on the clay as possible. With a smaller curve in the front and bigger curve in the back, this is a workhorse of a rib.
C$33.25
This set includes six, five point star shaped cutters in varying sizes, conveniently featured in a handy storage tin.
C$17.60
Used for shaping, smoothing and trimming pottery shapes. The steel scrapers (S) are made from thin flexible spring stainless steel.
C$5.45
Used for shaping, smoothing and trimming pottery shapes. The steel scrapers (S) are made from thin flexible spring stainless steel.
C$7.15
Used for shaping, smoothing and trimming pottery shapes. The steel scrapers (S) are made from thin flexible spring stainless steel.
C$9.40
Used for shaping, smoothing and trimming pottery shapes. The steel scrapers (S) are made from thin flexible spring stainless steel.
C$9.40
Used for shaping, smoothing and trimming pottery shapes. The steel scrapers (S) are made from thin flexible spring stainless steel.
C$6.40
Constructed in sturdy steel with incorporated ball bearings, as to be stable and smoothly turning even supporting a heavy weight of articles.
C$130.00
Use stilts to keep your fully glazed wares from sticking to the shelf during the firing process. Measurements are from metal point to metal point. Made in the USA.
C$2.10
Kemper's 4" Stilt Mark Stone removes unsightly lines and marks that can be left behind after firing.
C$8.75
A sample of 15 of The Ceramic Shop's top sellers. 1 each of the stilts shown in picture, as follows:
#0, #1, #2, #4, #6, #8, #3B, #4B, #5B
#6H, #15-4, Ring #4, #4x6, #10x15, #12x6
#0, #1, #2, #4, #6, #8, #3B, #4B, #5B
#6H, #15-4, Ring #4, #4x6, #10x15, #12x6
C$53.00
This robust needle tool is designed for potters who need to remove a thick uneven rim of a coarse clay body on the pottery wheel.
C$10.35
Canadian Made!
Please see below for further information and stock availability.
Please see below for further information and stock availability.
C$7.20