Orton

5" Gasket - for Orton Vent Master Collection Cup.

These non-asbestos, kevlar gloves that will protect your hands from heat. They are especially useful during raku firings.

Cone Plaques (holders) are designed to hold the cones at exactly the right angle so that they bend at the correct amount of heat work giving you accurate information about your firing.

Cone Plaques (holders) are designed to hold the cones at exactly the right angle so that they bend at the correct amount of heat work giving you accurate information about your firing.

You can upgrade from the standard VentMaster to the Controller Integrated Orton VentMaster when you purchase your kiln. It’s the same great vent, but hardwired to your kiln (it does not require a separate power source).

Standard (Large) Pyrometric Cones allow users a practical method to monitor the heatwork (the effect of temperature and time at temperature) inside their kiln.

The Orton Peep Hole Plug is a high temperature ceramic, tapered plug that can be used as a replacement on any kiln.

Small Cones are commonly used in the Kiln-Sitter®. The tapered shape allows some flexibility to adjust shut-off by placing the thinner or thicker portion of the cone under the sensing rod.

Self-Supporting Cones are the most accurate and easiest to use witness cones available.

The Orton VentMaster vents the fumes directly from the kiln before they exit the kiln into the room. This is a very effective venting system which we highly recommend with every kiln.

The Orton VentMaster Expansion Kit allows for another kiln to be vented to the same VentMaster Blower, at a fraction of the cost of a new vent.

The Orton VentMaster Hose Kit extends the distance between the blower motor and the collector cup. This kit is excellent for mounting the vent higher on a wall or further away from the kiln.